Thalidomide-O-amido-C4-NH2 hydrochloride, a synthesized E3 ligase ligand-linker conjugate that incorporates the Thalidomide basedcereblonligand and a linker, can be used in the synthesis ofPROTACs^[1].

Thalidomide-O-amido-C4-NH2 is an amine intermediate (Compound 41), which can be used as is a heterobifunctionalPROTAC BETdegrader. The bromodomain and extra-terminal (BET) family proteins, consisting of BRD2, BRD3, BRD4, and testis-specific BRDT members, are epigenetic “readers” and play a key role in the regulation of gene transcription. BET proteins are considered to be attractive therapeutic targets for cancer and other human diseases. Recently, heterobifunctional small-molecule BET degraders have been designed based upon the proteolysis targeting chimera (PROTAC) concept to induce BET protein degradation^[1]. Thalidomide-O-amido-C4-NH2 is a degron-linker (refer to Compound DL6-TL). Degron-linker-targeting ligand, wherein the linker is covalently bound lo at least one degron and at least one targeting ligand, the degron is a compound capable of binding to an ubiquitin ligase such as an E3 ubiquitin ligase (e g, cereblon), and the targeting ligand is capable of binding to the targeted protein (s)^[2].

438.86

Solid

C₁₉H₂₃ClN₄O₆

2245697-86-1

Room temperature in continental US; may vary elsewhere.

-20°C, stored under nitrogen, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture)

DMSO : 250 mg/mL(569.66 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (stored under nitrogen, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.08 mg/mL (4.74 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (4.74 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.08 mg/mL (4.74 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (4.74 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 3.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 2.08 mg/mL (4.74 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (4.74 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。