IT1t dihydrochloride is a potentCXCR4antagonist; inhibits CXCL12/CXCR4 interaction with anIC₅₀of 2.1 nM.

The CXCR4 is involved in chemotaxis and serves as a coreceptor for T-tropic HIV-1 viral entry and in cancer metastasis. IT1t is a small, drug-like, isothiourea derivative. IT1t shows very potent and dose-dependent inhibition of the CXCL12/CXCR4 interaction with an IC₅₀of 2.1 nM. This calcium flux is also inhibited by IT1t with an IC₅₀of 23.1^[1]. Strong electron density is observed for IT1t in the binding cavity of both subunits of the CXCR4 homodimer. In dimers of CXCR4 bound to IT1t, the monomers interact only at the extracellular side of helices V and VI, leaving at least a 4 A gap between the intracellular regions, which is presumably filled by lipids. The IT1t compound and CVX15 peptide have both been characterized as competitive inhibitors of CXCL12, and many of the receptor-ligand contacts in the co-crystal structures presented are important for CXCL12 binding, including the acidic Asp187, Glu2887.39 and Asp972.63. The binding site of IT1t may point to the major anchor region for this domain^[2].

IT1t reduces the formation of TNBC early metastases in the zebrafish xenograft model. Tumor cell invasion at the metastatic site is effectively reduced upon CXCR4 silencing (Fig. 7B), similar to the antagonist IT1t^[3].

479.57

Solid

C₂₁H₃₆Cl₂N₄S₂

1092776-63-0

Room temperature in continental US; may vary elsewhere.

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

H₂O : 50 mg/mL(104.26 mM;Need ultrasonic)

DMSO : ≥ 30 mg/mL(62.56 mM)

*"≥" means soluble, but saturation unknown.

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： PBS

  Solubility: 100 mg/mL (208.52 mM); Clear solution; Need ultrasonic
• 2.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 1.67 mg/mL (3.48 mM); Clear solution

  此方案可获得 ≥ 1.67 mg/mL (3.48 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 3.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 1.67 mg/mL (3.48 mM); Clear solution

  此方案可获得 ≥ 1.67 mg/mL (3.48 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 4.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 1.67 mg/mL (3.48 mM); Clear solution

  此方案可获得 ≥ 1.67 mg/mL (3.48 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。