Tubastatin A Hydrochloride (Tubastatin A HCl) is a potent and selective HDAC6 inhibitor with IC₅₀ of 15 nM in a cell-free assay, and is selective (1000-fold more) against all other isozymes exceptHDAC8(57-fold more). Tubastatin A Hydrochloride also inhibitsHDAC10andmetallo-β-lactamase domain-containing protein 2 (MBLAC2).

Tubastatin A is substantially selective for all 11 HDAC isoforms and maintains over 1000-fold selectivity against all isoforms excluding HDAC8, where it has approximately 57-fold selectivity. In homocysteic acid (HCA) induced neurodegeneration assays, Tubastatin A displays dose-dependent protection against HCA-induced neuronal cell death starting at 5 μM with near complete protection at 10 μM^[1]. At 100 ng/mL Tubastatin A increases Foxp³⁺T-regulatory cells (Tregs) suppression of T cell proliferation in vitro^[2]. Tubastatin A treatment in CC12 cells would lead to myotube formation impairment when alpha-tubulin is hyperacetylated early in the myogenic process; however, myotube elongation occurs when alpha-tubulin is hyeperacetylated in myotubes^[3]. A recent study indicates that Tubastatin A treatment increases cell elasticity as revealed by atomic force microscopy (AFM) tests without exerting drastic changes to the actin microfilament or microtubule networks in mouse ovarian cancer cell lines, MOSE-E and MOSE-L^[4].

Daily treatment of Tubastatin A at 0.5 mg/kg inhibits HDAC6 to promote Tregs suppressive activity in mouse models of inflammation and autoimmunity, including multiple forms of experimental colitis and fully major histocompatibility complex (MHC)-incompatible cardiac allograft rejection^[2].

371.86

Solid

C₂₀H₂₂ClN₃O₂

1310693-92-5

Room temperature in continental US; may vary elsewhere.

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

DMSO : 10.8 mg/mL(29.04 mM;Need ultrasonic and warming)

H₂O : 6.67 mg/mL(17.94 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 5% DMSO    40%PEG300   5%Tween-80   50% saline

  Solubility: ≥ 2.62 mg/mL (7.05 mM); Clear solution
• 2.

  请依序添加每种溶剂： 5% DMSO    95% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.62 mg/mL (7.05 mM); Clear solution
• 3.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.08 mg/mL (5.59 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (5.59 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 4.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.08 mg/mL (5.59 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (5.59 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 5.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 2.08 mg/mL (5.59 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (5.59 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。

• 6.

  请依序添加每种溶剂： 1% DMSO    99% saline

  Solubility: ≥ 0.52 mg/mL (1.40 mM); Clear solution