您好,欢迎来到试剂仪器网! [登录] [免费注册]
试剂仪器网
位置:首页 > 产品库 > Lesinurad sodium
立即咨询
咨询类型:
     
*姓名:
*电话:
*单位:
Email:
*留言内容:
请详细说明您的需求。
*验证码:
 
Lesinurad sodium
本产品不向个人销售,仅用作科学研究,不用于任何人体实验及非科研性质的动物实验。
Lesinurad sodium图片
CAS NO:1151516-14-1
包装与价格:
包装价格(元)
10 mM * 1 mL in DMSO电议
5mg电议
10mg电议
50mg电议
100mg电议
200mg电议
500mg电议
1 g电议

产品名称
RDEA-594 sodium
产品介绍
Lesinurad sodium (RDEA594 sodium)是URAT1抑制剂。
生物活性

Lesinurad sodium is aURAT1andOATinhibitor, is determined to be a substrate for the kidney transportersOAT1andOAT3withKmvalues of 0.85 and 2 μM, respectively.

IC50& Target

Km: 0.85 μM (OAT1), 2 μM (OAT3)[1]

体外研究
(In Vitro)

Lesinurad is a novel selective uric acid reabsorption inhibitor (SURI). Lesinurad is determined to be a substrate for the kidney transporters organic anion transporter (OAT1) and OAT3 with Kmvalues of 0.85 and 2 μM, respectively[1]. Lesinurad (RDEA594) is a URAT1 and OAT inhibitor, which increases proximal renal tubule urate excretion[2]. Lesinurad (RDEA594) is a potential uric acid lowering agent througn inhibition of uric acid reuptake, and exhibits favorable p450 profiles, inhibits CYP2C9 and CYP2C8 with IC50of 14.4 μM and 16.2 μM, respectively. IC50s of Lesinurad are all above 100 μM for CYP1A2, CYP2C19,and CYP2D6[3].

体内研究
(In Vivo)

Lesinurad (RDEA594) shows better pharmacokinetics than its pro-drug RDEA806. The 100 mg dose of Lesinurad exhibits a phamacological effect in the range of that produced by 300 mg to 800 mg single doses of RDEA806[3].

Clinical Trial
分子量

426.26

性状

Solid

Formula

C17H13BrN3NaO2S

CAS 号

1151516-14-1

中文名称

雷西那德钠

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, stored under nitrogen

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)

溶解性数据
In Vitro: 

DMSO : 100 mg/mL(234.60 mM;Need ultrasonic)

配制储备液
浓度溶剂体积质量1 mg5 mg10 mg
1 mM2.3460 mL11.7299 mL23.4599 mL
5 mM0.4692 mL2.3460 mL4.6920 mL
10 mM0.2346 mL1.1730 mL2.3460 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month (stored under nitrogen)。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40%PEG300   5%Tween-80   45% saline

    Solubility: 2.5 mg/mL (5.86 mM); Clear solution; Need ultrasonic

    此方案可获得 2.5 mg/mL (5.86 mM) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH2O 中,得到澄清透明的生理盐水溶液
  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20%SBE-β-CDin saline)

    Solubility: 2.5 mg/mL (5.86 mM); Clear solution; Need ultrasonic

    此方案可获得 2.5 mg/mL (5.86 mM) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

    将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中,再用生理盐水定容至 10 mL,完全溶解,澄清透明
  • 3.

    请依序添加每种溶剂: 10% DMSO    90%corn oil

    Solubility: 2.5 mg/mL (5.86 mM); Clear solution; Need ultrasonic

    此方案可获得 2.5 mg/mL (5.86 mM) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

*以上所有助溶剂都可在本网站选购。