您好,欢迎来到试剂仪器网! [登录] [免费注册]
试剂仪器网
位置:首页 > 产品库 > FLAG peptide
立即咨询
咨询类型:
     
*姓名:
*电话:
*单位:
Email:
*留言内容:
请详细说明您的需求。
*验证码:
 
FLAG peptide
本产品不向个人销售,仅用作科学研究,不用于任何人体实验及非科研性质的动物实验。
FLAG peptide图片
CAS NO:98849-88-8
包装与价格:
包装价格(元)
1mg电议
5mg电议
10mg电议
25mg电议
50mg电议
100mg电议

产品介绍
FLAG peptide 是一种八个氨基酸组成的多肽 (Asp-Tyr-Lys-Asp-Asp-Asp-Asp-Lys),具有肠激酶切割位点。FLAG peptide 用于抗体介导的重组蛋白的识别和纯化。
生物活性

FLAG peptide is an eightamino acidspeptide (Asp-Tyr-Lys-Asp-Asp-Asp-Asp-Lys) with an enterokinase-cleavage site; designed for antibody-mediated identification and purification of recombinant proteins.

体外研究
(In Vitro)

Fusion protein technology has become an important tool for solving numerous problems linked to recombinant protein production. The properties of the additional tag facilitate identification and provide a one-step purification procedure of the fusion protein by passing cell extracts or supernatants through columns of an appropriate matrix. FLAG peptide allows elution under non-denaturing conditions. Several antibodies against FLAG peptide have been developed. One antibody, M1, binds the peptide in the presence of bivalent metal cations, preferably Ca2+. Elution is effected by chelating agents. Another strategy is competitive elution with excess of free FLAGe peptide. Antibodies M2 and M5 are applied in this procedure[1]. The Flag-tag is first described as a calcium-dependent epitope of a monoclonal antibody. It is a highly acidic octapeptide which can be N-terminally fused to the protein of interest. As a very hydrophilic peptide the Flag–tag has a high surface probability. Flag-fusion proteins can be captured by an immunoaffinity column in the presence of Ca2+and eluted byEDTA at low concentrations, neutral pH and thus, nearly physiological conditions[2].

分子量

1012.97

性状

Solid

Formula

C41H60N10O20

CAS 号

98849-88-8

Sequence

Asp-Tyr-Lys-Asp-Asp-Asp-Asp-Lys

Sequence Shortening

DYKDDDDK

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

Sealed storage, away from moisture and light, under nitrogen

Powder-80°C2 years
-20°C1 year

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)

溶解性数据
In Vitro: 

H2O : 100 mg/mL(98.72 mM;Need ultrasonic)

配制储备液
浓度溶剂体积质量1 mg5 mg10 mg
1 mM0.9872 mL4.9360 mL9.8720 mL
5 mM0.1974 mL0.9872 mL1.9744 mL
10 mM0.0987 mL0.4936 mL0.9872 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture and light, under nitrogen)。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: PBS

    Solubility: 100 mg/mL (98.72 mM); Clear solution; Need ultrasonic

*以上所有助溶剂都可在本网站选购。