Bleomycin sulfate 是一种 DNA 损伤剂,抑制DNA合成。Bleomycin sulfate 是一种抗肿瘤抗生素 (antibiotic)。
生物活性 | Bleomycin sulfate is aDNA synthesisinhibitor. Bleomycin hydrochloride is a DNA damaging agent. Bleomycin sulfate is an antitumorantibiotic[1]. |
IC50& Target | |
体外研究 (In Vitro) | Bleomycin (BLM) sulfate is chosen as the best-studied micronucleus (MN) inducers in human lymphocytes with different mechanisms of genotoxicity. The most frequent Bleomycin-induced DNA lesions are single and double strand breaks and single apuinic/apyrimidinic sites. At the same time Bleomycin is true radiomimetic compound, resembling almost completely the genetic effect of ionizing radiation[1]. The IC50value of Bleomycin sulfate for UT-SCC-19A cell line is 4.0±1.3 nM. UT-SCC-12A and UT-SCC-12B are both more resistant to Bleomycin (BLM); IC50values are 14.2±2.8 nM and 13.0±1.1 nM, respectively[2]. Bleomycin sulfate (50, 100 μM; for 24, 48 h) induce pulmonary fibrosis in RLE-6TN cell (50 μM) and A549 cell (100 μM)[4].
|
体内研究 (In Vivo) | Bleomycin sulfate treatment (3.5-4.0 mg/kg; intra-tracheal) on day 0, body weights decreases by day 4 then increases by Day 7 through the end of the study[3]. Bleomycin sulfate (3.5-4.0 mg/kg; intra-tracheal) produces a statistically significant increase in lung hydroxyproline levels, and also increases right caudal lung lobe mass[3]. Bleomycin sulfate (intratracheal instillation; 5.0 mg/kg/day) induces pulmonary fibrosis in eighty 8-week-old male BALB/c mice with weight about 20-30 g. Bleomycin induces the expression levels of α-SMA and collagen I[4]. Bleomycin sulfate (intratracheally; 2.5 mg/kg; 1.25 mg/ml, approximately 50 μl per mouse) induces pulmonary fibrosis in male C57BL/6 mice (8 weeks old, average weight approximately 24.5 g)[5].
Animal Model: | Male Fischer 344 rats, 8-10 week old, weighing 150-250 g[3] | Dosage: | 3.5-4 mg/kg | Administration: | Intra-tracheal | Result: | Body weights decreased by day 4 then increased by Day 7 through the end of the study. |
|
Clinical Trial | |
分子量 | |
性状 | |
Formula | |
CAS 号 | |
中文名称 | |
结构分类 | - Antibiotics
- Other Antibiotics
|
来源 | |
运输条件 | Room temperature in continental US; may vary elsewhere. |
储存方式 | 4°C, sealed storage, away from moisture *In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture) |
溶解性数据 | In Vitro: H2O : 255 mg/mL(168.58 mM;Need ultrasonic and warming) DMSO : 41.67 mg/mL(27.55 mM;Need ultrasonic) 配制储备液 1 mM | 0.6611 mL | 3.3055 mL | 6.6110 mL | 5 mM | 0.1322 mL | 0.6611 mL | 1.3222 mL | 10 mM | 0.0661 mL | 0.3306 mL | 0.6611 mL |
*请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。 In Vivo: 请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂: ——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用;
以下溶剂前显示的百 分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶 1. 请依序添加每种溶剂: PBS Solubility: 100 mg/mL (66.11 mM); Clear solution; Need ultrasonic and warming and heat to 60℃ 2. 请依序添加每种溶剂: Saline Solubility: 100 mg/mL (66.11 mM); Clear solution; Need ultrasonic 3. 请依序添加每种溶剂: 10% DMSO 40%PEG300 5%Tween-80 45% saline Solubility: ≥ 2.08 mg/mL (1.38 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL (1.38 mM,饱和度未知) 的澄清溶液。 以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。 4. 请依序添加每种溶剂: 10% DMSO 90% (20%SBE-β-CDin saline) Solubility: ≥ 2.08 mg/mL (1.38 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL (1.38 mM,饱和度未知) 的澄清溶液。 以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。 5. 请依序添加每种溶剂: 10% DMSO 90%corn oil Solubility: ≥ 2.08 mg/mL (1.38 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL (1.38 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。 以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。 *以上所有助溶剂都可在本网站选购。
|