(R)-(-)-Gossypol 是天然产物 Gossypol 的左旋异构体，可与 BCL-2、BCL-xL 和 Mcl-1 结合，Ki 为 0.32 μM、0.48 μM 和 0.18 μM。

AT101, the R-(-) enantiomer of Gossypol acetic acid, binds with Bcl-2, Bcl-xL and Mcl-1 with Ki of 0.32 μM, 0.48 μM and 0.18 μM.

AT-101 inhibits a panel of different lymphoproliferative malignancies with IC50 ranged from 1.2 μM to 7.4 μM. AT-101 (10 μM) disrupts the Δψm in a concentration- and time-dependent manner in a diffuse large B-cell and in mantle cell lymphoma lines. AT-101 (1 μM or 2 μM) combined with carfilzomib (6 nM or 10 nM) induces apoptosis in HBL-2 and Granta cell lines. [2] AT-101 (20 μM for 24 hours) results in a median 72% apoptosis and down-regulation of Mcl-1 in CLL lymphocytes in both suspension culture as well as stromal coculture. Stromal cells express undetectable levels of antiapoptotic but high levels of activated ERK and AKT proteins and has low or no apoptosis with AT-101. [3] AT-101 induces apoptosis in a time- and dose-dependent fashion, with ED50 values of 1.9 mM and 2.4 mM in Jurkat T and U937 cells, respectively. AT-101 (10 μM) combined with radiation (32 Gy) induces more apoptosis than radiation alone and exceeds the sum of the effects caused by the single agent treatments. AT-101 activates SAPK/JNK in a dose- and time-dependent manner. [4] AT-101 (10 μM) induces apoptosis through activation of caspase-9, -3, and -7 in VCaP Cells. AT-101 (10 μM) decreases Bcl-2 and Mcl-1 expression in VCaP cells. [5] AT-101 (< 20 μM) is able to inhibit the growth of multiple myeloma cells despite the stimulatory growth effects provided by stromal cells in the bone marrow milieu. AT-101 (10 μM) induces apoptosis in multiple myeloma cells via the activation of caspases 3, caspases 9 and PARP. AT-101 (10 μM) promotes apoptosis in multiple myeloma cells by disrupting the Bax/Bcl-2 ratio and the mitochondrial membrane potential. [6]

Fluorescence-Polarization-Based Binding Assay: For competitive binding experiments, Bcl-2 protein (40 nM) and FAM-Bid peptide (2.5 nM) are preincubated in the assay buffer (100 mM potassium phosphate, pH 7.5; 100 μg/mL bovine gamma globulin; 0.02% sodium azide, 5 μL of a solution in DMSO of AT101 is added to the Bcl-2/FAM-Bid solution in Dynex 96-well, black, round-bottom plates to produce a final volume of 125 μL. For each experiment, a control containing Bcl-2 and Flu-Bid peptide (equivalent to 0% inhibition), and another control containing only FAM-Bid, are included on eachassay plate. After 4 hours incubation, the polarization values in milipolarization units (mP) weremeasured at an excitation wavelength at 485 nm and an emission wavelength at 530 nm using the Ultra plate reader. IC50,the inhibitor concentration at which 50% of bound peptide is displaced, is determined from the plot using nonlinear leastsquares analysis and curve fitting performed using GraphPad Prizm 4 software. The unlabeled Bid BH3 peptide is used as the positive control. PF for Bcl-xL protein, Bak BH3 peptide labeled with 6-carboxyfluorescein succinimidyl ester (FAM-Bak) instead of the FAM-Bim to maximize the signal. It is determined that FAM-Bak has a Kd of 6 nM to Bcl-xL protein. The competitive binding assay for Bcl-xL is same as that for Bcl-2 with the following exceptions. 30 nM of Bcl-xL protein and 2.5 nM of FAM-Bak peptide in the following assay buffer: 50 mM Tris-Bis, pH 7.4 and 0.01% bovine gamma globulin. PF for Mcl-1 protein, FAM-Bid peptide and human Mcl-1 protein are used. It is determined that FAM-Bid peptide binds to human Mcl-1 protein with a Kd of 1.71 nM. The competitive binding assays for Mcl-1 are performed in the same manner as that for Bcl-2 with the following exceptions. 5 nM Mcl-1 and 1 nM Flu-Bid peptide in the following assay buffer: 25 mM Tris, pH 8.0; 150 mM NaCl and 0.05% Pluronic acid

Cells are counted and resuspended at an approximate concentration of 3×105 cells/well in a 24-well plate. AT-101 is diluted in DMSO that is maintained at a final concentration of less than 0.5%. Concentrations of AT-101 from 1 nM to 10 μM are used in most experiments. Following incubation at 37 ℃ in a 5% CO2 humidified incubator, 100 μL from each well is transferred to a 96-well opaque-walled plate; cell-Titer-Glo Reagent is added in a 1:1 ratio. Contents are mixed for 2 minutes on an orbital shaker to induce cell lysis. The plates are allowed to incubate at room temperature for 10 minutes before recording luminescence with a Synergy HT Multi-Detection Microplate Reader. In the schedule dependency experiments, serial dilutions of each drug are prepared in ratios relative to their IC50. Cells are preincubated with AT-101 for up to 72 hours, while 4-HC is added for a 24-hour period, being added at time 0, 24 hours, and 48 hours from the start of incubation. Each experiment is performed in triplicate and repeated at least twice.(Only for Reference)

90141-22-3

C30H30O8

518.55

R-(-)-gossypol acetic acid;AT101

DMSO:>80 mg/mL
Ethanol:>80 mg/mL
Powder: -20°C for 3 years
In solvent: -80°C for 2 years