Dibutyryl-cGMP sodium (Bt2cGMP sodium) is a cell-permeable cGMP analogue. Dibutyryl-cGMP sodium preferentially activatescGMP-dependent protein kinase (PKG). Dibutyryl-cGMP sodium inhibits the release of [³H]-arachidonic acid from γ thrombin-stimulated human platelets. Dibutyryl-cGMP sodium induces peripheral antinociception via activation ofATP-sensitive K⁺channels^[1][2][3].

cGMP-dependent protein kinase (PKG)^[1];
ATP-sensitive K⁺channels^[3]

Dibutyryl-cGMP is able to induce process elongation and branching in astrocytes resulting from a rapid, reversible and concentration-dependent redistribution of glial fibrillary acidic protein (GFAP) and actin filaments without significant change in protein levels^[1].
When cells are co-incubated with Dibutyryl-cGMP (100 μM) stress fibre formation is prevented and cells acquired a stellate morphology in cerebellar astrocytes^[1].
In cells treated with Dibutyryl-cGMP (100 μM, 2 h) the particulate fraction is nearly devoid of RhoA protein. Dibutyryl-cGMP prevents RhoA-membrane association^[1].
Using the scratchwound model, the size of the wound is significantly smaller in cells treated with Dibutyryl-cGMP after the wound indicating that dbcGMP accelerates wound closure^[1].

Dibutyryl-cGMP (50-200 μg/paw; subcutaneous injection; male Wistar rats) treatment antagonizes the hyperalgesic effect of PGE2 in a dose-dependent manner. Maximal antinociceptive effect of DbcGMP is at 1 h after administration and last for plus 2 h^[3].

507.37

Solid

C₁₈H₂₃N₅NaO₉P

51116-00-8

Room temperature in continental US; may vary elsewhere.

-20°C, stored under nitrogen, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture)

H₂O : 100 mg/mL(197.09 mM;Need ultrasonic)

DMSO : 100 mg/mL(197.09 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (stored under nitrogen, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.5 mg/mL (4.93 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (4.93 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.5 mg/mL (4.93 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (4.93 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 3.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 2.5 mg/mL (4.93 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (4.93 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。