您好,欢迎来到试剂仪器网! [登录] [免费注册]
试剂仪器网
位置:首页 > 产品库 > ML355
立即咨询
咨询类型:
     
*姓名:
*电话:
*单位:
Email:
*留言内容:
请详细说明您的需求。
*验证码:
 
ML355
本产品不向个人销售,仅用作科学研究,不用于任何人体实验及非科研性质的动物实验。
ML355图片
CAS NO:1532593-30-8
规格:≥98%
包装与价格:
包装价格(元)
5mg电议
10mg电议
25mg电议
50mg电议
100mg电议
250mg电议
500mg电议

产品介绍
理化性质和储存条件
Molecular Weight (MW) 441.52
Formula C21H19N3O4S2
CAS No. 1532593-30-8
Storage-20℃ for 3 years in powder form
-80℃ for 2 years in solvent
Solubility (In vitro)DMSO:>40 mg/mL
Water: <1 mg/mL
Ethanol: <1 mg/mL
Solubility (In vivo)15mg/kg in DMSO:Solutol:PEG400:water; 5:10:20:65
SynonymsML-355; ML 355; ML355;
实验参考方法
In Vitro

In vitro activity: Human donor islets obtained from integrated islet distribution program (www.iidp.cohorg. ) were incubated overnight in CMRL media (cat. no. 15–110-CV MediaTech, Inc. Manassas, VA) containing 10% fetal bovine serum, 1 U penicillin, and 1 μg streptomycin (pen/strep). Islets were equilibrated in serum free media (CMRL containing pen/Strep and 1% fatty acid free human serum albumin (cat. no. A1887 Sigma, St. Louis, MO)), for 1 h prior to pretreatment with 10 μM of 35 for 30 min. For 12-HETE induction, islets were treated with 100 μM arachidonic acid (cat. no. BML-FA003–0100, Enzo Life Sciences Plymouth Meeting, PA) and 5 μM A23187 (cat. no. C7522, Sigma, St. Louis, MO) for 4 h at 37 °C. Islets were harvested, centrifuged at 1000 rpm for 5 min with cleared supernatant and islet pellet being stored at –80 °C. For extraction of the supernatants, samples were acidified to pH 3 with 1N HCl for 30 min and spun at 1000 rpm for 5 min. Samples were added to a prepared column (prewashed with 3 mL of EtOH, followed by 3 mL of H2O) and washed with 3 mL of H2O, followed by 3 mL of 15% EtOH and 3 mL of hexane. The samples were eluted with 3 mL of ethyl acetate and dried under nitrogen gas before, reconstitution in 500 mL of 12-HETE ELISA sample buffer (Enzo Life Sciences, Plymouth Meeting, PA). Cell pellets were extracted using CHCl3/MeOH and samples dried under nitrogen gas before reconstitution in 250 μL of ELISA sample buffer. 12-HETE levels in samples were determined using a 12-HETE ELISA kit (cat. no. 901–050, Enzo Life Sciences, Plymouth Meeting, PA).


Kinase Assay: All screening operations were performed on a fully integrated robotic system (Kalypsys Inc., San Diego, CA) as described elsewhere. 3 μL of enzyme (approximately 80 nM 12-LOX, final concentration) were dispensed into 1536-well Greiner black clear-bottom assay plates. Compounds and controls (23 nL) were transferred via Kalypsys PinTool equipped with 1536-pin array. The plate was incubated for 15 min at room temperature, and then a 1 μL aliquot of substrate solution (50 μM arachidonic acid final concentration) was added to start the reaction. The reaction was stopped after 6.5 min by the addition of 4 μL of FeXO solution (final concentrations of 200 μM Xylenol Orange (XO) and 300 μM ferrous ammonium sulfate in 50 mM sulfuric acid). After a short spin (1000 rpm, 15 s), the assay plate was incubated at room temperature for 30 min. The absorbances at 405 and 573 nm were recorded using ViewLux high-throughput CCD imager (Perkin-Elmer, Waltham, MA) using standard absorbance protocol settings. During dispensing, enzyme and substrate bottles were kept submerged into a +4 °C recirculating chiller bath to minimize degradation. Plates containing DMSO only (instead of compound solutions) were included approximately every 50 plates throughout the screen to monitor any systematic trend in the assay signal associated with reagent dispenser variation or decrease in enzyme specific activity. Data were normalized to controls, and plate-based data corrections were applied to filter out background noise.


Cell Assay: Cells were gown to 90% confluency in 24-well plates in DMEM (cat. no. 11885092, Life Technologies Grand Island, NY) +10% FBS. Cells were pretreated with ML355 and stimulated as for human islets. After four hours, the media was removed and spun at 1000 rpm for 5 min. The cleared supernatant was stored at –80 °C prior to analysis. For analysis, supernatants were extracted on SepPak c18 SPE column (cat. no. WAT054945, Waters Corporation, Milford, MA) and dried under nitrogen gas before reconstitution in 500 μL of 12-HETE ELISA buffer and analysis following manufacturers recommendations (cat. no. 901–050, Enzo Life Sciences, Plymouth Meeting, PA).

In VivoML355 was specifically formulated in Polyethylene Glycol 300 (PEG 300) for oral gavage dosing in mice for in vivo thrombosis and hemostasis studies. For FeCl3-induced mesenteric arteriole thrombosis model, WT mice (both recipient and platelet donor mice) were pre-treated with ML355 (15 mg/Kg and 30 mg/kg) formulated in PEG 300 solution or PEG 300 alone and 12-LOX-/- with or without ML355 treatment (30 mg/kg) as control via oral gavage 2 times per day for two days prior to intravital microscopy studies. For laser-induced cremaster arteriole thrombosis model, mice were treated with ML355 (1.88, 3.75, 7.5, 15, and 30 mg/kg based on in vivo pharmacokinetics) or with PEG 300 via oral administration as described above prior to intravital microscopy studies. The maximum plasma ML355 concentration and residual drug concentration/plasma clearance in mice administered ML355 were determined by pharmacokinetic studies. Aspirin (100 mg/Kg) was dissolved in DMSO and PBS and injected intravenously as a slow bolus (over 1 min).
Animal model Wt Mice
Formulation & DosageFor FeCl3-induced mesenteric arteriole thrombosis model, WT mice (both recipient and platelet donor mice) were pre-treated with ML355 (15 mg/Kg and 30 mg/kg) formulated in PEG 300 solution or PEG 300 alone and 12-LOX-/- with or without ML355 treatment (30 mg/kg) as control via oral gavage 2 times per day for two days prior to intravital microscopy studies. For laser-induced cremaster arteriole thrombosis model, mice were treated with ML355 (1.88, 3.75, 7.5, 15, and 30 mg/kg based on in vivo pharmacokinetics) or with PEG 300 via oral administration
References

J Med Chem. 2014 Jan 23; 57(2): 495–506.; Arterioscler Thromb Vasc Biol. 2017 Oct;37(10):1828-1839.