Mifamurtide sodium (MTP-PE sodium), an analog of the muramyl dipeptide (MDP), is a nonspecific immunomodulator by stimulating the immune response activating macrophages and monocytes. Mifamurtide sodium, an orphan drug, is a specific ligand ofNOD2used as aninsulinsensitizer. Mifamurtide sodium has the potential for osteosarcoma research^[1][2][3].

Mifamurtide sodium (MTP-PE sodium; 100 μM) induces a reduction of MG63 cells number when co-cultured with macrophages^[3].
Mifamurtide sodium (100 μM) increases both the M1 polarization marker iNOS and the M2 polarization marker CD206 mRNAs; both pro-inflammatory (IL-1β, IL-6) and anti-inflammatory (IL-4, IL-10) cytokines. Mifamurtide sodium increases the iron transporter DMT1 protein^[3].
L-mifamurtide sodium (5, 5000 nM; for 48 hours) alone has no direct effect on the proliferation rate of the two osteosarcoma cell lines MOS-J and KHOS in vitro or in vivo^[1].
Mifamurtide sodium acts as a nonspecific immunomodulator by activating macrophages and monocytes related to the upregulation of tumoricidal activity and secretion of pro-inflammatory cytokines including tumor necrosis factor (TNF)-a, interleukin (IL)-1, IL-6, IL-8, IL-12, nitric oxide (NO), prostaglandin E2 (PGE2) and PGD2^[3].

Mifamurtide sodium (MTP-PE sodium; 1 mg/kg; i.v.; twice per week for 4 weeks) causes a trend of diminished spontaneous lung metastasis dissemination^[1].
Mifamurtide sodium (50 μg/mouse) improves glucose tolerance during endotoxemia in mice. Mifamurtide sodium (equivalent to 20 μg MDP; 4 times per week for 5 weeks) improves glucose tolerance in HFD-fed mice without altering body mass^[2].

1259.48

Solid

C₅₉H₁₀₈N₆NaO₁₉P

90825-43-7

米伐木肽钠盐；米法莫肽钠盐

Room temperature in continental US; may vary elsewhere.

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

DMSO : 50 mg/mL(39.70 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 5 mg/mL (3.97 mM); Clear solution

  此方案可获得 ≥ 5 mg/mL (3.97 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 50.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: 5 mg/mL (3.97 mM); Suspended solution; Need ultrasonic

  此方案可获得 5 mg/mL (3.97 mM) 的均匀悬浊液，悬浊液可用于口服和腹腔注射。

  以 1 mL 工作液为例，取 100 μL 50.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 3.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 5 mg/mL (3.97 mM); Clear solution

  此方案可获得 ≥ 5 mg/mL (3.97 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 50.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。