Tandutinib hydrochloride (MLN518 hydrochloride) is a potent and selective inhibitor of theFLT3with anIC₅₀of 0.22 μM, and also inhibitsc-KitandPDGFRwithIC₅₀s of 0.17 μM and 0.20 μM, respectively. Tandutinib hydrochloride can be used for acute myelogenous leukemia (AML)^[1][2]. Tandutinib hydrochloride has the ability to cross the blood-brain barrier^[3].

Tandutinib (0-3 μM; 30 minutes; Ba/F3 cells) treatment inhibits IL-3-independent cell growth and FLT3-ITD autophosphorylation with anIC₅₀of 10-100 nM in Ba/F3 cells expressing different FLT3-ITD mutants^[1].
Tandutinib (1 μM; 24-96 hours; Molm-14 and THP-1 AML cells) treatment induces apoptosis in FLT3-ITD-positive AML cells^[1].
In human FLT3-ITD-positive AML cell lines, Tandutinib inhibits FLT3-ITD phosphorylation (IC₅₀of ~30 nM). As with Erk2, a constitutively high level of Akt phosphorylation is readily detected and is efficiently blocked by pretreatment of the Molm-14 cells with 100-300 nM Tandutinib^[1].
Tandutinib inhibits cell proliferation of the FLT3-ITD-positive Molm-13 and Molm-14 with anIC₅₀of 10 nM. And signaling through the MAP kinase and PI3 kinase pathways^[1].

Tandutinib (60 mg/kg; oral gavage; daily; for 35 days; athymic nude mice) treatment causes a statistically significant increase in survival that was extended on average by 20 days^[1].

599.16

Solid

C₃₁H₄₃ClN₆O₄

2438900-70-8

Room temperature in continental US; may vary elsewhere.

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

DMSO : ≥ 100 mg/mL(166.90 mM)

H₂O : 100 mg/mL(166.90 mM;Need ultrasonic)

*"≥" means soluble, but saturation unknown.

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： PBS

  Solubility: 100 mg/mL (166.90 mM); Clear solution; Need ultrasonic
• 2.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.5 mg/mL (4.17 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (4.17 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 3.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.5 mg/mL (4.17 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (4.17 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明