| 编号 | 中文名称 | 英文名称 |
| ANSI C78.1420-2001 | 电灯.缩微胶片投影灯.GX5.3基座的2英寸(50mm)内二色性涂层反射边绝的标准卤钨灯 | Electric Lamps - Microfilm Projection Lamps-Two-inch (51mm) Dichroic Coated IntegRAL Reflector, Rim Reference, Tungsten Halogen Lamps with GX5.3 Bases |
| ANSI C78.1434-2001 | 带GX7.9基座的冷凝二色性涂层整体反光侧钉的卤钨投射灯 | Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.9 Bases |
| ANSI/ASTM A937/A 937M-2001 | 利用两个相邻试验表面测定绝缘涂层层间电阻的方法 | Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces |
| ANSI/ASTM A976-1997 | 复合绝缘涂层绝缘能力和应用的分类 | Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application |
| ANSI/ASTM B735-1995 | 硝酸蒸气测试金属基体上金涂层孔隙率的方法 | Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor |
| ANSI/ASTM B741-1995 | 纸电谱法测量金属基体上金涂层孔隙率的方法 | Test Method for Porosity in Gold Coatings on Metal Substrates by Paper Electrography |
| ANSI/ASTM B750-1999 | 热浸涂层锌5%铝混合稀土合金(UNS Z38510)铸锭规范 | Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings |
| ANSI/ASTM B798-1995 | 凝胶体电谱法测定金属基物上金或钯涂层孔隙度的方法 | Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography |
| ANSI/ASTM D1458-2001 | 电绝缘用完全硫化硅橡胶涂层玻璃布与玻璃带试验方法 | Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ANSI/ASTM D2534-1988 | 蜡涂层的动摩擦系数的试验方法(05.01) | Coefficient of Kinetic Friction for Wax Coatings, Method of Test for (05.01) |
| ANSI/ASTM D3214-1997 | 电绝缘涂料粉末及其涂层试验方法 | Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation |
| ANSI/ASTM D3236-1988 | 热熔性胶粘剂和涂层材料的表观密度的试验方法(05.02) | Apparent Viscosity of Hot Melt Adhesives and Coating Materials, Method of Test for (05.02) |
| ANSI/ASTM D3521-1986 | 波纹纸板上表面蜡涂层的试验方法 | Test Method for Surface Wax Coating on Corrugated Board |
| ANSI/ASTM D3708-1988 | 在涂层加工中使用的蜡的重量的试验(05.03) | Weight of Wax Applied During Curtain Coating Operation, Test for (05.03) |
| ANSI/ASTM D4917-1997 | 用水平面法测量非涂层书写印刷纸动态和静态摩擦系数的方法 | Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method |
| ANSI/ASTM D4918-1997 | 用倾斜面法测试无涂层书写纸和印刷纸静磨擦系数的试验方法 | Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method |
| ANSI/ASTM F1916-1998 | 拘役用带涂层链节栅栏结构和圆柱的链节栅栏系统选用规范 | Specifications for Selecting Chain Link Barrier Systems with Coated Chain Link Fence Fabric and Round Posts for Detention Applications |
| ANSI/ASTM F2016-2000 | 规定船体结构、舾装设备和涂层的质量要求惯例 | Practice for Establihsing Shipbuiling Quality Requirements for Hull Structure, Outfitting and Coatings |
| ANSI/AWS A4.4M-2001 | 焊接助熔剂和电焊条助熔剂涂层含水量标准测定程序 | Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings |
| ANSI/AWWA C116/A 21.16-2003 | 供水设备用球墨铸铁和灰铁配件的内外表面的防护熔融胶合环氧涂层 | Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service |
| ANSI/AWWA C203-2002 | 给水钢管煤焦油保护涂层和内衬.热用搪瓷和胶带 | Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied |
| ANSI/AWWA C203a-1999 | 钢制供水管道的煤焦油保护涂层和内衬标准.搪瓷和胶带.热水 | Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied |
| ANSI/AWWA C205-2007 | 商用4英寸和4英寸以上钢水管的水泥灰浆保护衬和涂层 | Cement-Mortar Protective Lining and Coating for Steel Water Pipe - 4 in and Larger - Shop Applied |
| ANSI/AWWA C209-2007 | 钢水管用特殊部件、连接件和配件的外部用低温磁带涂层 | Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
| ANSI/AWWA C210-2003 | 钢制水管的内外层用液体环氧树脂涂层系统 | Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C213-2001 | 给水钢管的内、外层熔化粘结环氧涂层 | Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C213a-2002 | 钢制水管内外的熔融胶合环氧树脂涂层 | Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C215-2004 | 钢制水管的外层用挤压聚烯烃涂层 | Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines |
| ANSI/AWWA C216-2007 | 给水钢管用专用部件、连接件和配件外部可热收缩交联的聚烯烃涂层 | Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
| ANSI/AWWA C222-1999 | 钢水管和配件聚氨基甲酸乙酯内或外涂层 | Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings |
| ANSI/AWWA C224-2007 | 钢水管、连接件、配件和特殊部件的内部和外部用尼龙11基聚酰胺涂层系统 | Nylon-11-Based Polyamide Coating System for the Interior and Exterior of Steel Water Pipe, Connections, Fittings, and Special Sections |
| ANSI/AWWA C550-2005 | 阀门和给水栓用防护性内部涂层 | Protective Interior Coatings for Valves and Hydrants |
| ANSI/AWWA D102-2006 | 涂层的钢制储水箱 | Coating Steel Water - Storage Tanks |
| ANSI/EIA 455-55A-1986 | 光纤涂层几何尺寸的测量方法 | Coating Geometry of Optical Fibers, Methods for Measuring the |
| ANSI/EIA-364-48A-2006 | 测量电器连接器件的金属涂层厚度的试验程序 | Metallic Coating Thickness Measurement of Contacts Test Procedure for Electrical Connectors |
| ANSI/EIA/TIA 455-173-1990 | 用光纤侧面观测法测量涂层几何尺寸 | Coating Geometry Measurement for Optical Fiber Side View Method |
| ANSI/IEEE 1523-2002 | 户外陶瓷绝缘子用室温硫化硅橡胶涂层的应用、维护和评价指南 | Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators |
| ANSI/NFPA 703-2006 | 建筑材料用阻燃处理木材和阻燃涂层标准 | Standard for Fire-Retardant Treated Wood and Fire-Retardant Coatings for Building Materials |
| ANSI/TIA-455-173-1990 | 光纤侧面检查法采用的涂层几何形状测量 | Coating Geometry Measurement for Optical Fiber Side View Method |
| ANSI/TIA-455-178-B-2003 | FOTP-178 IEC 60793-1-32 光学纤维.第1-32部分:测量方法和试验规程.涂层可剥离性 | FOTP-178 IEC 60793-1-32 Optical Fibers - Part 1-32: Measurement Methods and Test Procedures - Coating Stripability |
| ANSI/TIA-455-195-A-2003 | 光学纤维涂层的几何学测量.FOTP195 | Coating Geometry Measurement for Optical Fiber - FOTP195 |
| ANSI/TIA/EIA 455-195-2000 | 光纤涂层的几何量测量.FOTP195 | Coating Geometry Measurement for Optical Fiber - FOTP195 |
| ANSI/UL 1715-2003 | 内部涂层材料燃烧试验的安全标准 | Standard for Safety for Fire Test of Interior Finish Material |
| ASTM A 121-2007 | 金属涂层碳素钢刺钢丝的标准规范 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
| ASTM A 308/A 308M-2006 | 经热浸工艺涂层的镀铅锡(铅锡合金)铁薄板标准规范 | Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process |
| ASTM A 630-2003 | 电镀锡薄板锡涂层重量测定的标准试验方法 | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate |
| ASTM A 754/A 754M-2006 | X射线荧光涂层厚度的标准试验方法 | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
| ASTM A 792/A 792Ma-2006 | 经热浸工艺涂层55%铝锌合金铁薄板材标准规范 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASTM A 882/A 882Ma-2004 | 填充式环氧树脂涂层的7股预应力钢绞线标准规范 | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand |
| ASTM A 899-1991 | 环氧涂层钢丝 | Steel Wire, Epoxy-Coated |
| ASTM A 90/A 90M-2007 | 带锌或锌合金涂层的钢铁制品上涂层重量(质量)用标准试验方法 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
| ASTM A 924/A 924M-2007 | 热浸金属涂层钢薄板一般要求的标准规范 | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
| ASTM A 926-2003 | 波纹形金属管用涂层材料耐磨性比较的标准试验方法 | Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe |
| ASTM A 933/A 933M-2007 | 加固用聚氯乙烯(PVC)涂层钢丝和焊接钢丝网的标准规范 | Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement |
| ASTM A 950/A 950M-1999 | 熔接环氧树脂涂层结构钢氢反应堆和垛板的标准规范 | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
| ASTM A 974-1997 | 焊线纤维金属筐和金属丝网的标准规范.(金属涂层或聚氯乙烯(PVC)涂层) | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM A 975-1997 | 双层和扭转网眼金属筐和护墙垫金属和涂层钢线或聚氯乙烯(PVC)金属涂层钢线 | Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
| ASTM A 976-2003 | 与绝缘能力和应用相关的复合绝缘涂层的标准分类 | Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application |
| ASTM B 252-1992 | 电镀层和转化涂层用锌合金压模铸件的制备 | Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings |
| ASTM B 588-1988 | 用双束干涉显微技术测量透明涂层或不透明涂层厚度的试验方法 | Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam-Interference Microscope Technique |
| ASTM B 602-1988 | 金属及无机涂层的属性抽样试验方法 | Test Method for Attribute Sampling of Metallic and Inorganic Coatings |
| ASTM B 681-1988 | 用光截面显微镜测量铝阳极镀层厚度及不透明表面的其它透明涂层厚度的试验方法 | Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope |
| ASTM B 733-2004 | 金属表面自催化(无电)镍磷涂层标准规范 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM B 735-2006 | 用硝酸蒸汽测试金属基体上金涂层孔隙率的标准试验方法 | Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor |
| ASTM B 748-1990 | 用扫描电子显微镜测量横截面测定金属涂层厚度的方法 | Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope |
| ASTM B 750-2007 | 热浸涂层用锭铁模型中GALFAN(锌-5%铝-含铈稀土)合金的标准规范 | Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings |
| ASTM B 762-1990 | 金属涂层和无机物涂层的不同抽样 | Variables Sampling of Metallic and Inorganic Coatings |
| ASTM B 766-1986 | 镉电沉积涂层标准规范 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 767-1988 | 用重量分析法和其它化学分析法测定电沉积涂层及相关涂层单位面积的质量 | Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
| ASTM B 798-1995 | 用凝胶体电谱法测定金属基物上金或钯涂层孔隙度的标准试验方法 | Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography |
| ASTM B 809-1995 | 用湿硫黄蒸气("硫黄华")作金属涂层中孔隙率测试的标准试验方法 | Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor ("Flowers-of-Sulfur") |
| ASTM B 866-1995 | 用聚硫化物浸入法测试金属涂层中总疵点和机械损坏的标准试验方法 | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| ASTM B 879-1997 | 镁和镁合金上非电解质转换涂层的标准规范 | Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| ASTM B 893-1998 | 工程应用硬涂层阳极氧化规范 | Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
| ASTM B 940-2005 | 在锌和镉表面非铬酸涂层试验的标准实施规程 | Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces |
| ASTM C 1048-2004 | 热处理平板玻璃的标准规范.HS和FT类涂层和无涂层玻璃 | Standard Specification for Heat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM C 1321-2004 | 建筑物内部辐射控制涂层系统(IRCCS)的安装和使用的标准实施规程 | Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction |
| ASTM C 1483-2004 | 建筑物外部防太阳辐射涂层的标准规范 | Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
| ASTM C 1624-2005 | 用定量单点划痕试验测定陶瓷涂层粘结强度和机械损坏类型的标准试验方法 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
| ASTM C 216a-2007 | 涂层砖(由粘土或页岩制造的实心砌块)的标准规范 | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) |
| ASTM C 419-1994 | 胶泥绝热涂层的试样制作与养护的标准实施指南 | Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings |
| ASTM C 536-1983 | 钢制设备玻璃涂层的连续性电测试的标准试验方法 | Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing |
| ASTM C 537-1987 | 用高压法测试钢制反应设备玻璃涂层可靠性的标准试验方法 | Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage |
| ASTM C 633-2001 | 热喷涂层的粘附力或粘结强度的标准试验方法 | Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings |
| ASTM C 703-1972 | 铝制搪瓷涂层的抗脱落试验方法 | Test Methods for Spalling Resistance of Porcelain Enameled Aluminum |
| ASTM C 743-1987 | 搪瓷涂层连续性的标准试验方法 | Standard Test Method for Continuity of Porcelain Enamel Coatings |
| ASTM C 884/C 884M-1998 | 混凝土和环氧树脂涂层间热容性的标准试验方法 | Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| ASTM D 1005-1995 | 用千分尺测量有机涂层干膜厚度的标准试验方法 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 1014-2002 | 金属基质涂料和涂层的室外暴露的标准试验规程 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 1053a-1992 | 橡胶性能的标准试验方法.低温下固化:挠性聚合物和涂层织物 | Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 1187-1997 | 金属保护涂层用沥清乳液的标准规范 | Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal |
| ASTM D 1188-2007 | 使用涂层样品的压实沥青混合料的毛体积比重和密度的标准试验方法 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples |
| ASTM D 1212-1991 | 有机涂层湿膜厚度的测试方法 | Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 1227-1995 | 屋面保护涂层用乳化沥青的标准规范 | Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 1458-2001 | 电绝缘用完全硫化硅橡胶涂层的玻璃布与玻璃带的标准试验方法 | Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ASTM D 1459-1993 | 电绝缘用硅清漆涂层的玻璃布和玻璃带的标准规范 | Standard Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation |
| ASTM D 1474-1998 | 有机涂层压痕硬度的试验方法 | Test Methods for Indentation Hardness of Organic Coatings |
| ASTM D 16-2007 | 涂料、相关涂层、材料和应用的标准术语 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
| ASTM D 1653-2003 | 有机涂层薄膜水蒸气渗透性标准试验方法 | Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
| ASTM D 1735-2004 | 用水雾仪进行涂层耐水性试验的标准规程 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 1931-1999 | 电绝缘用完全硫化的硅橡胶涂层玻璃布和玻璃带的标准规范 | Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ASTM D 2136-2002 | 涂层织物的低温弯曲标准试验方法 | Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
| ASTM D 2137-2005 | 橡胶特性的标准试验方法.挠性聚合物和涂层织物的脆化点 | Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 2197-1998 | 用刮板式粘合试验器测定有机涂层粘合性的试验方法 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 2247-2002 | 涂层在100%相对湿度下耐水性的试验的标准操作规程 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
| ASTM D 2248a-2001 | 有机涂层的耐洗涤剂性能的标准规范 | Standard Practice for Detergent Resistance of Organic Finishes |
| ASTM D 2336-1999 | 涂料厂对涂覆于木制品的涂层由液态至固态的标准指南 | Standard Guide for Specifying Factory Applied Wood Coatings |
| ASTM D 2370-1998 | 有机涂层抗拉性能试验方法 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 2454-1995 | 测定烘焙过度对有机涂层的影响的标准操作规程 | Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
| ASTM D 268-2001 | 涂料及其相关涂层和原料用挥发性溶剂及化学中间体的抽样和测试的标准指南 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM D 2697-2003 | 透明或着色涂层中不挥发物体积的标准测试方法 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 2793-1999 | 木板制底材上有机涂层抗粘连性的标准试验方法 | Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates |
| ASTM D 2794-1993 | 有机涂层抗快速形变(冲击)作用的标准试验方法 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| ASTM D 2803-2003 | 金属有机涂层耐丝状锈蚀的试验用标准指南 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 2824-2006 | 无纤维增强、石棉纤维增强和无石棉的纤维增强的填充铝颜料的沥青屋面涂层标准规范 | Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos |
| ASTM D 2967-2007 | 粉末涂层角落敷层的标准试验方法 | Standard Test Method for Corner Coverage of Powder Coatings |
| ASTM D 3003-2001 | 金属衬底表面有机涂层耐压力斑迹和抗粘连性标准试验方法 | Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates |
| ASTM D 3236-1988 | 热熔粘合剂及涂层材料表观粘度的标准试验方法 | Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials |
| ASTM D 3259-1995 | 红外线测定木制品涂层固化期间温度的标准实施规程 | Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle |
| ASTM D 3260-2001 | 适用于工厂的压制铝制品透明涂层的耐酸和耐灰浆标准试验方法 | Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
| ASTM D 3273-2000 | 环境模拟室内涂层表面的抗霉菌生长标准试验方法 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3281-1984 | 用冲击边缘弯曲仪测定附加有机涂层可成形性的试验方法 | Test Method for Formability of Attached Organic Coatings with Impact-Wedge Bend Apparatus |
| ASTM D 3361-2001 | 用非滤光碳弧型装置测定涂料和有关涂层的标准实施规程 | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 3389-2005 | 涂层织物耐磨性的标准试验方法(旋转平台双头磨蚀机) | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader) |
| ASTM D 3393-1991 | 涂层织物.耐水性 | Coated Fabrics - Waterproofness |
| ASTM D 3450-2000 | 内用建筑涂层可洗性的标准试验方法 | Standard Test Method for Washability Properties of Interior Architectural Coatings |
| ASTM D 3451-2006 | 试验涂层粉末和粉末涂层的标准指南 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 3625-1996 | 用开水测试水对沥青涂层集料的影响的标准操作规程 | Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water |
| ASTM D 3630-1989 | 测定保护涂层中有害成分的方法 | Determining Constituents Classified as Hazardous Contained in Protective Coatings |
| ASTM D 3792-2005 | 直接注入式气相色谱法测定涂层中水含量的标准试验方法 | Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph |
| ASTM D 3843-2000 | 核装置防护涂层质量保证的标准实施规程 | Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities |
| ASTM D 3911-2003 | 设计基本事故(DBA)的模拟条件下评价轻水核电站用涂层的标准试验方法 | Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions |
| ASTM D 3912-1995 | 轻水核电站用涂层耐化学性的标准试验方法 | Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants |
| ASTM D 3925-2002 | 液态涂料和相关颜料涂层的抽样标准实施规程 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 3949-1999 | 电绝缘用玻璃涂层织物的标准规范 | Standard Specification for Coated Glass Fabrics Used for Electrical Insulation |
| ASTM D 3960-2005 | 涂料及相关涂层中挥发性有机化合物含量测定的标准实施规范 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 3964-2004 | 表面测量用涂层试样的选择的标准规程 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 4005-1992 | 塑料涂覆织物.聚氯乙烯弥散涂层的溶解度的试验方法 | Standard Test Method for Plastic-Coated Fabrics - Completeness of Fusion of PVC Dispersion Coatings |
| ASTM D 4060-2007 | 用泰伯尔磨蚀机测定有机涂层耐磨性的标准试验方法 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 4061-1994 | 平面涂层回复反射的标准试验方法 | Standard Test Method for Retroreflectance of Horizontal Coatings |
| ASTM D 4082-1995 | Υ射线对轻水核电站用涂层影响的标准试验方法 | Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants |
| ASTM D 4109a-1995 | 男人及男孩用机织连衣裤工作服、劳动布工作服、工装裤及车间涂层织物的标准性能规范 | Standard Performance Specification for Mens and Boys Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics |
| ASTM D 4118-2001 | 妇女用机织工作服、劳动布、工装裤及车间涂层织物的标准性能规范 | Standard Performance Specification for Women's Woven Coverall, Dungaree, Overall, and Shop Coat Fabrics |
| ASTM D 4138a-2007 | 用横截面分割破坏法测定防护涂层系统干膜厚度的标准实施规程 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 4141-2007 | 涂层的黑箱和阳光集中暴露处理用标准实施规程 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 4144-1994 | 紫外线固化涂层包装耐久性评估的标准试验方法 | Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing |
| ASTM D 4145-1983 | 预涂板涂层柔韧性试验方法 | Test Method for Coating Flexibility of Prepainted Sheet |
| ASTM D 4146-1996 | 钢材表面富锌底漆/铬酸盐复合涂层可成形性的标准试验方法 | Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel |
| ASTM D 4147-1999 | 线绕收缩用线圈涂层的适用规程 | Applying Coil Coatings Using the Wire-Wound Drawdown Bar |
| ASTM D 4227-2005 | 混凝土表面涂层涂刷油漆工的资格评定的标准实施规程 | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces |
| ASTM D 4228-2005 | 钢表面涂层涂刷油漆工的资格评定的标准实施规程 | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces |
| ASTM D 4457-2002 | 直接注入气相色谱仪法测定涂料及涂层中二氯甲烷和1,1,1-三氯乙烷的标准试验方法 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM D 4479-2007 | 无石棉的沥表屋面涂层用标准规范 | Standard Specification for Asphalt Roof Coatings - Asbestos-Free |
| ASTM D 4537a-2004 | 核设施涂层工作检验人员的资格和认证考核程序确立的标准指南 | Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating WoRK Inspection in Nuclear Facilities |
| ASTM D 4541-2002 | 用手提式粘合试验仪测定涂层脱落强度的标准试验方法 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4585-2007 | 用受控冷凝法测试涂层耐水性的标准实施规程 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM D 4587-2005 | 涂料及相关涂层的荧光紫外线聚合曝光的标准实施规程 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 4610-1998 | 测定涂料和相关涂层上微生物(真菌或藻类)的存在及清除的标准指南 | Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM D 4712a-1987 | 检验工业用水的标准指南.可还原涂层 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 4851-2007 | 建筑用涂层织物和层叠织物的标准试验方法 | Standard Test Methods for Coated and Laminated Fabrics for Architectural Use |
| ASTM D 4917-1997 | 用水平面法测试无涂层书写纸和印刷纸的静磨擦和动磨擦系数的标准试验方法 | Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method |
| ASTM D 4918-1997 | 用倾斜面法测试无涂层书写纸和印刷纸静磨擦系数的标准试验方法 | Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method |
| ASTM D 4939-1989 | 在天然海水中使船只防污涂层遭受生物污垢和流体剪切力的试验方法 | Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater |
| ASTM D 5009-2002 | 实验室条件下评估和比较喷涂层传送效率的标准试验方法 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
| ASTM D 5031-2001 | 使用封闭碳弧光灯曝露仪对涂料及有关涂层进行试验的标准实施规程 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 5043-2004 | 涂层现场识别的标准规程 | Standard Practice for Field Identification of Coatings |
| ASTM D 5065-2007 | 钢表面老化涂层条件的评估用标准指南 | Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| ASTM D 5087-2002 | 测定含溶剂汽车涂层释放的和在挥发有机化合物控制装置中可除去的挥发有机化合物总量的标准试验方法 | Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 5108-1990 | 海水中防污涂层体系有机物扩散速度的测试方法 | Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water |
| ASTM D 5139-1990 | 核电厂用涂层定量检查用的样品制备标准规范 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
| ASTM D 5161a-2004 | 确定涂层和镶衬作业(金属衬里)检验要求的标准指南 | Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates) |
| ASTM D 5163a-2005 | 核电厂运行时使用的I级涂层性能监测程序制定的标准指南 | Standard Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant |
| ASTM D 5179-2002 | 直接抗拉试验测定有机涂层和塑料基质的粘着力的标准试验方法 | Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing |
| ASTM D 5193/D 5193M-1993 | 涂层织物的试验方法.空气保持性 | Test Method for Coated Fabrics - Air Retention |
| ASTM D 522a-1993 | 涂覆有机涂层的芯杆弯曲试验的标准试验方法 | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 5382-2002 | 粉末涂层光学特性评定标准指南 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
| ASTM D 5479-1994 | 部分浸入的船舶涂层的耐生物污垢试验的标准规程 | Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed |
| ASTM D 5531-2005 | 涂层的颜色和几何外观的实物产品标准的制定、维护和发布的标准指南 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM D 5589-1997 | 测定漆膜及有关涂层耐海藻损坏的标准试验方法 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement |
| ASTM D 5590-2000 | 用加速的四周琼脂平面培养分析测定漆膜及有关涂层耐霉菌损坏的标准试验方法 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM D 5711-2003 | 粗集料上粘附涂层测定的标准试验方法 | Standard Test Method for Determining the Adherent Coating on Coarse Aggregates |
| ASTM D 5767-1995 | 涂层表面成像清晰度光泽仪器测量的标准试验方法 | Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces |
| ASTM D 5895-2003 | 用机械式记录器评定有机涂层在薄膜成形期间干燥或固化的标准试验方法 | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 5962-1996 | 评定核反应堆的 I 级区域内连续不合格涂层(油漆)标准指南 | Standard Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility |
| ASTM D 5965-2002 | 涂层粉末比重的标准测试方法 | Standard Test Methods for Specific Gravity of Coating Powders |
| ASTM D 6037-1996 | 强光泽涂层耐干磨损的标准试验方法 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 609-2000 | 涂料、清漆、转化涂层和相关覆层产品的测试用冷轧钢板制备的标准实施规范 | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM D 6132-2004 | 用超声波仪表对外施的有机涂层的干膜厚度进行无损测量的标准试验方法 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage |
| ASTM D 6133-2002 | 通过直接注入一气体色谱仪测定含溶剂和含水涂料、涂层、树脂和原材料中丙酮及甲基和丁基醋酸盐含量的标准试 | Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
| ASTM D 6189-1997 | 有机涂层的化学去除剂的效果评价的标准操作规程 | Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
| ASTM D 6190-1997 | 通过土壤埋葬的试验室模仿对管道涂层的阴极非结合的标准试验方法 | Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial |
| ASTM D 6191-1997 | 由可水减的空气干燥涂层离析的甲醛的测量的标准试验方法 | Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings |
| ASTM D 6266a-2000 | 由VOC控制装置内除去的涂层和水载汽车涂层中释放的挥发性有机物(VOC)的总量测定的试验方法 | Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 6356-1998 | 用作屋顶防护涂层的铝乳化沥青的氢气体产生的标准试验方法 | Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 6441-2005 | 测量粉末涂层遮盖能力的标准试验方法 | Standard Test Methods for Measuring the Hiding Power of Powder Coatings |
| ASTM D 6486-2001 | 汽车涂层的短时暴露的标准实施规程 | Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
| ASTM D 6580-2000 | 锌粉涂料与锌粉涂料硫化薄膜和富锌涂层硫化薄膜中金属锌含量测定的标准试验方法 | Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings |
| ASTM D 6675-2001 | 机动车薄钢板上有机涂层的盐加速户外表面腐蚀试验的标准实施规程 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM D 6694-2007 | 喷射聚氨酯泡沫屋顶材料用液体硅涂层的标准规范 | Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing |
| ASTM D 6762a-2002 | 通过喷涂层的外观评价测定涂料遮盖能力的标准试验方法 | Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
| ASTM D 6902-2004 | 蜜胺-甲醛基涂层在固化过程中实验室测量甲醛含量的标准试验方法 | Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings |
| ASTM D 6903-2007 | 从防污涂层测定替代海洋水中有机生物杀菌剂投放率的标准试验方法 | Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water |
| ASTM D 6904-2003 | 砌筑体外涂层耐风雨的标准实用规程 | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| ASTM D 6905-2003 | 有机涂层冲击弯曲性的标准试验方法 | Standard Test Method for Impact Flexibility of Organic Coatings |
| ASTM D 6943-2003 | 工业防护涂层的浸没试验标准规程 | Standard Practice for Immersion Testing of Industrial Protective Coatings |
| ASTM D 6944-2003 | 硫化涂层耐热循环的标准试验方法 | Standard Test Method for Resistance of Cured Coatings to Thermal Cycling |
| ASTM D 6947-2007 | 喷涂聚氨酯泡沫屋顶系统用液体水分固化聚氨酯涂层的标准规范 | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| ASTM D 6958-2003 | 木材涂层侧粘结潜力评价的标准试验方法 | Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings |
| ASTM D 6991-2005 | 用悬臂梁法测量有机涂层内部应力的标准试验方法 | Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method |
| ASTM D 6998-2004 | 评价乳化沥青集料涂层的标准实施规程 | Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts |
| ASTM D 7055-2004 | 涂层试验用热轧碳钢薄板准备(喷砂清理)的标准规程 | Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
| ASTM D 7072-2004 | 评价胶乳涂层加速风化的标准实施规程 | Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
| ASTM D 7088-2004 | 砖石工程用地下设施涂层的抗流体静压力的标准规程 | Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
| ASTM D 7091-2005 | 应用于黑色金属的无磁涂层和应用于有色金属的无磁和不导电涂层的干膜厚度的无损测量的标准实施规程 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 7093-2004 | 双轴拉伸穹面上钢的有机涂层薄膜的可成形性的标准试验方法 | Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome |
| ASTM D 7108-2005 | 确立核涂层专家资格的标准指南 | Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist |
| ASTM D 7207-2005 | 利用台式标称液力感应剪应力测定无涂层轧制防冲刷制品(RECP)对沙保护能力的标准试验方法 | Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions |
| ASTM D 7230-2006 | 评估涂层设施安全等级III的水浸渍的聚合体内管的标准试验方法. 金属衬底上相关设备 | Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates |
| ASTM D 7245-2007 | 测定含水总量和加热产生固化水的液体涂层中挥发物含量的标准试验方法 | Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating |
| ASTM D 7356-2007 | 用氙弧光曝光装置加速汽车透明涂层酸侵蚀的标准试验方法 | Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device |
| ASTM D 7376-2007 | 卷状涂层金属湿竖管存储条件户外评定的标准实施规程 | Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
| ASTM D 7378-2007 | 测量实用涂层粉末预固化厚度的标准实施规程 | Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness |
| ASTM D 751-2006 | 涂层织物的标准试验方法 | Standard Test Methods for Coated Fabrics |
| ASTM D 822-2001 | 用经过过滤的明光碳弧曝光装置测定涂料及相关涂层的标准实施规程 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 870-2002 | 水浸渍法测试涂层的耐水性能的标准实施规程 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM E 1317a-1997 | 船舶表面涂层易燃性的标准试验方法 | Standard Test Method for Flammability of Marine Surface Finishes |
| ASTM E 1522-1993 | 实验室玻璃器皿耐高压加热保护涂层 | Autoclavable Protective Coatings on Laboratory Glassware |
| ASTM E 1659-2005 | 电镀镍锌合金薄钢板的涂层重量和化学分析的标准试验方法 | Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet |
| ASTM E 1795-2004 | 建筑物含铅漆用非增强液体涂层封装产品标准规范 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1796-2003 | 建筑物中含铅漆的液体涂层封装产品的选择和使用的标准指南 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1797-2004 | 建筑物中含铅漆用增强的液体涂层封装产品用标准规范 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1814-1996 | 涂层的计算机层析摄影(CT)检查的标准实施规范 | Standard Practice for Computed Tomographic (CT) Examination of Castings |
| ASTM E 1920-2003 | 热喷涂层的金相制备用标准指南 | Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings |
| ASTM E 2098-2000 | PB级外绝缘和涂层系统(EIFS)中使用的玻璃纤维增强网暴露于氢氧化钠溶液后拉伸断裂强度测定的标准试验方法 | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
| ASTM E 2109-2000 | 测定热喷镀涂层孔隙率面积百分比的试验方法 | Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings |
| ASTM E 2134-2001 | 评定外部绝缘和涂层系统拉伸-粘着特性的标准试验方法 | Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) |
| ASTM E 2141-2006 | 密封隔热玻璃元件上吸收的电镀铬涂层稳定性评价的标准试验方法 | Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units |
| ASTM E 2338-2006 | ASTM E 2338-2006Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Se | Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards |
| ASTM E 2354-2004 | 密封绝缘玻璃设备内吸收性电致变色涂层的耐用性评估用标准指南 | Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units |
| ASTM E 2355-2004 | 抛光表面上吸收性电致变色涂层均匀性测量的标准试验方法 | Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface |
| ASTM E 2485-2006 | 耐冷冻/解冻融化的外部绝缘和装饰系统(EIFS)和防水涂层的标准术语 | Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings |
| ASTM E 2501-2007 | 荧光粉涂层检验用光源产品的标准规范 | Standard Specification for Light Source Products for Inspection of Fluorescent Coatings |
| ASTM E 2570-2007 | 外部绝缘和精整系统或排水管中用防水物障涂层评定的标准试验方法 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| ASTM F 1043-2006 | 金属工业链护栏框架强度和保护性涂层的标准规范 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
| ASTM F 1136M-2004 | 紧固件的抗锌/铝腐蚀涂层的标准规范(米制) | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric] |
| ASTM F 1428-1992 | 紧固件用非有机顶涂层,防腐蚀涂层的铝颗粒填充底涂层/有机物 | Aluminum Particle-Filled Basecoat/Organic of Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
| ASTM F 1609-2003 | 可植入材料用磷酸钙涂层标准规范 | Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| ASTM F 1664-2001 | 与链接栅栏一起使用的聚氯乙烯涂层拉伸钢丝的标准规范 | Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence |
| ASTM F 1665-2001 | 与链接栅栏一起使用的聚氯乙烯涂层刺钢丝的标准规范 | Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 1842-2002 | 测定薄膜开关的塑料基质上油墨或涂层粘附的标准试验方法 | Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications |
| ASTM F 1916-1998 | 选择拘役用带涂层链节栅栏结构和圆柱的链节栅栏系统的标准规范 | Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications |
| ASTM F 1978-2000 | 用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| ASTM F 2016-2000 | 确定造船船体构造、装配和涂层质量要求的标准实施规范 | Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings |
| ASTM F 2217-2002 | 涂层/粘合剂重量测定标准实施规范 | Standard Practice for Coating/Adhesive Weight Determination |
| ASTM F 2250-2003 | 柔性包装材料上打印墨水和涂层抗化学腐蚀性评价的标准规程 | Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials |
| ASTM F 2252-2003 | 使用胶带评价柔性包装材料与墨水和涂层间粘性的标准规程 | Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape |
| ASTM F 2357-2004 | 使用NORMAN工具"RCA"磨擦器测定薄膜开关上墨水和涂层抗磨性的标准试验方法 | Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader |
| ASTM F 479-2006 | 绝缘涂层在使用中维护的标准使用规范 | Standard Specification for In-Service Care of Insulating Blankets |
| ASTM F 519-2006 | 电镀/涂层处理和设备环境的机械氢脆化评价的标准试验方法 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
| ASTM F 715-2007 | 溢油控制和储存用涂层织物的标准试验方法 | Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage |
| ASTM F 718-2007 | 造船厂和船舶漆及涂层制品/程序数据单的标准 | Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| ASTM F 735-2006 | 用摆动沙袋法测定透明塑料及涂层抗磨损性的标准试验方法 | Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
| ASTM G 10-1983 | 管道涂层比可弯性的试验方法 | Standard Test Method for Specific Bendability of Pipeline Coatings |
| ASTM G 11-2004 | 室外气候老化对管道涂层的影响的标准试验方法 | Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings |
| ASTM G 12-2007 | 钢制管道涂层膜厚度的无损测量用标准试验方法 | Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel |
| ASTM G 14-2004 | 管道涂层抗冲击性的标准试验方法(落锤试验) | Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) |
| ASTM G 17-2007 | 管道涂层耐渗透性用标准试验方法(钝头棒) | Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) |
| ASTM G 19-2004 | 直接土埋法测定管道涂层抗剥落特性的标准试验方法 | Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial |
| ASTM G 20-1988 | 管道涂层抗化学药物腐蚀性的试验方法 | Test Method for Chemical Resistance of Pipeline Coatings |
| ASTM G 55-2007 | 管道涂层修补材料的评估用标准试验方法 | Standard Test Method for Evaluating Pipeline Coating Patch Materials |
| ASTM G 6-2007 | 管道涂层抗磨性标准试验方法 | Standard Test Method for Abrasion Resistance of Pipeline Coatings |
| ASTM G 62-2007 | 管道涂层假期检测用标准试验方法 | Standard Test Methods for Holiday Detection in Pipeline Coatings |
| ASTM G 70-2007 | 管道涂层环形可弯曲性标准试验方法(压实试验) | Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) |
| ASTM G 8-1996 | 管道涂层阴极剥离的标准试验方法 | Standard Test Methods for Cathodic Disbonding of Pipeline Coatings |
| ASTM G 80-2007 | 管道涂层特效阴极剥落的标准试验方法 | Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings |
| ASTM G 9-2007 | 管道涂层渗水性的标准试验方法 | Standard Test Method for Water Penetration into Pipeline Coatings |
| ASTM G 95-2007 | 管道涂层的阴极剥离试验用标准试验方法(附着电池法) | Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) |
| IEEE 1523-2002 | 室外陶瓷绝缘子用室温硫化硅酮橡胶涂层的应用、维护和评价 | (Application, maintenance, and evaluation of room temperature vulcanizing (RTV) silicone rubber coatings for outdoor ceramic insulators) |
m.cnreagent.com