The FHA, single zone, and FHC, 3-zone, tube furnaces can be used either vertically or horizontally and have a maximum operating temperature of 1350 ℃.

The extensive F range of tube furnaces is offered with a wide range of accessories. The furnaces comprise ceramic fibre modules with a high quality 5 mm APM wire heating element mounted in the insulation, held in position by a ceramic holding ridge. The low thermal mass ceramic fibre insulation ensures low energy consumption and allows fast heating rates. The control thermocouple is a high grade type S thermocouple. Additionally, the tube furnace is available with up to 8 heating zones for the most precise temperature control and uniformity.

ageing, annealing, brazing, calcination, catalyst research, CIM, coating, CVD, degassing, drying, hardening, MIM, miniplants, pyrolysis, sintering, soldering, sublimation, synthesis, tempering, test fuel cells, thermocouple calibration

1350 ℃ maximum operating temperature

Single zone models fitted with Carbolite Gero 3216CC PID controller with single ramp to setpoint and process timer

3-zone models fitted with 1 x programmable 3216CC and 2 x 3216CC end zone controllers, with retransmission of setpoint

可配工作管最大外径110mm

Heated lengths of 200, 500, 750, 1000 or 1250 mm

Use in horizontal or vertical orientation

Exceptional lifetime and temperature stability

High grade type S thermocouple

Low thermal mass ceramic fibre insulation

High quality 5 mm APM wire as heating element

Furnace fitted with separate control box with 3 m cable, plug and socket

A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications

过温保护

Wide choice of tube diameters and materials is available: eg quartz, ceramic, metal

'L' stand for vertical usage

隔热保温塞和防辐射屏蔽塞防止热量损失提高温度均匀性

Modified atmosphere and vacuum assemblies are available

Larger tube diameters on request

Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above

Oxygen sensor for inert gas packages

View inside of the tube furnace

outer case

end insulation

case insulation

heating elements

inner insulation (hot face)

The rectangular housing is constructed with slots for convection cooling of the outer housing. With insulation made from low thermal mass ceramic fibre material, the heat conduction is reduced to a minimum.

Inside the tube furnace, the heating element is constructed of vacuum formed fibres containing free radiating heating elements that are attached to the insulation by a ceramic holding ridge.

When compared to conventional heating methods, the 5 mm thick heating wires are combined with a low voltage, heavy-weight transformer power supply that provides an extraordinary long lifetime of the heating elements and temperature stability. The control thermocouple is a high grade type S thermocouple. Additionally, each tube furnace model is available with up to 8 heating zones for the most precise temperature control and uniformity.

内容可能会被修改或更正。

FHA 13/32/200

FHA 13/32/500

FHA 13/50/200

FHA 13/50/500

FHA 13/50/750

FHA 13/80/200

FHA 13/80/500

FHA 13/80/750

FHA 13/80/1000

FHA 13/110/500

FHA 13/110/750

FHA 13/110/1000

FHA 13/110/1250

FHC 13/32/500

FHC 13/50/500

FHC 13/50/750

FHC 13/80/500

FHC 13/80/750

FHC 13/80/1000

FHC 13/110/500

FHC 13/110/750

FHC 13/110/1000

FHC 13/110/1250

请注意：
- Heat up rate when using a ceramic work tube must be limited to 5 °C/min
- Further to the depth of the control module 150 mm for the power plugs and other plugs need to be added
- Minimum uniform length in horizontal furnace with insulation plugs fi tted at 100 °C below max. temperature
- Power supply: a = 1 phase (16A)+N / b = 3 phase (16A)+N / c = 3 phase (32A)+N / d = 3 phase (63A)+N

内容可能会被修改或更正。